Crìa Go LN₂

Cold has never travelled this light.

One coolant, liquid nitrogen, and 7 days at −196 °C in a container you can carry over your shoulder.

Crìa Go LN₂ standing beside its padded shoulder bag
−196 °C
Setpoint
7 days
Hold at −196 °C
< 5 kg
Fully loaded
Any orientation
Handling
What it is

Crìa Go LN₂ is a portable container dedicated to liquid nitrogen. It holds −196 °C for 7 days, weighs under 5 kg fully loaded, and travels in any orientation, so it can be carried by hand and stowed like ordinary cabin baggage. The absorbent is built into the container, so there is no cartridge to fit, nothing to charge or plug in, and no cool-down cycle before you fill.

Cartridges

One cartridge, one setpoint.

Crìa Go LN₂ runs on liquid nitrogen and nothing else, held in a built-in absorbent.

Cartridge · LN₂ only
Crìa Go LN₂ runs one coolant: no other cartridge fits.
Temperature (set by coolant)
This coolant runs a single validated setpoint.
ReadoutLN₂ · −196 °C
+8 °C−20−67−78−196 °C
Temperature setpoint−196 °C
Hold time7 days
Payload capacity15×2 ml vials
Coolant loadLiquid nitrogen, built-in absorbent
Coolant typeConsumable
Outer size
53 × 13 × 13 cm
Weight, loaded
< 5 kg
Handling
Orientation-free
What is included

Everything included. Just add your samples.

Everything below comes with every unit. Nothing is optional, nothing to configure.

  • The container itself, with the LN₂ absorbent built in
  • The Crìa carry bag, padded and worn over the shoulder
  • A Bluetooth datalogger, paired with the Crìa companion app
  • Handling and transport documentation for air travel
A technician in a face shield and cryogenic gloves lifting the sample rack out of Crìa Go LN₂, nitrogen vapour spilling from the opening, with liquid-nitrogen storage tanks behind
Samples ride on the rack, which lifts out for loading. The liquid nitrogen stays in the built-in absorbent.
Specifications

On paper.

Hold time7 days at −196 °C
Weight, fully loaded< 5 kg
CoolantLiquid nitrogen, held in the built-in absorbent
Internal capacity15 × 2 ml vials
External dimensions530 × 130 × 130 mm
Operating vacuum10⁻⁶ to 10⁻⁹ mbar
MaterialsStainless steel with an advanced-composite outer shell
OrientationOrientation-free (vertical or horizontal)
Air transportIATA-compliant, cabin-bag compatible
In your workflow

Four steps, start to finish.

1

Fill

Fill with liquid nitrogen and load your samples. The absorbent is built into the container, so there is no cartridge to fit.

2

Close

Check that the liquid nitrogen has been taken up by the absorbent and drain any excess, then close the lid.

3

Travel

Carry it upright, flat, or stowed in any orientation. It is cabin-bag compatible, and the transport documentation ships with it.

4

Monitor

The datalogger records payload and outer temperature and flags handling events with timestamps. Export the trip as PDF or CSV.

In transit

It travels with you.

Cabin-bag compatible, so a −196 °C shipment travels with you rather than ahead of you.

Crìa Go LN₂ in its carry bag on a rolling suitcase in an airport terminal, with the line Fly safe, Stay cryogenic, Travel Crìa
Monitoring is included.Every unit ships with a Bluetooth datalogger and the Crìa companion app: payload and outer temperature across the trip, handling events with timestamps, exported as PDF or CSV.
See what it records
Pre-order yours

Secure your place in the first production run.

A pre-order holds your place in the first production run. It is not a purchase, and no payment is taken on this site: tell us how many units you need and how you ship, and we confirm configuration, price, and lead time by email.

No payment today. We confirm price and lead time first.